Teflon Grease High Load and High Speed ​​- All Surfaces and Central Lubrication

    Description

    Teflon Lubricating Grease High Load and High Speed ​​- All Surfaces and Central Lubrication (product 636) is a universally applicable NLGI 2 grease with PTFE (Polytetrafluoroethylene). It is suitable for use in heavily and varyingly loaded ball, rolling, roller and sliding bearings, but also for axle journals of water pumps, winches, chassis, leaf springs, ball joints, etc.

    • Good adhesion
    • Long service life and corrosion resistant
    • Extra protection against shock and vibration loads

    Reduce the lubrication frequency by a factor of 3 to 5.

    This lubricating grease is composed of NLGI 2 grease with PTFE (Polytetrafluoroethylene), which gives it good adhesion and a long service life. It is suitable for ball, rolling, roller and plain bearings as well as for journals of water pumps, winches, chassis, leaf springs, ball joints and other applications. In addition, it provides additional protection against shock and vibration loads and is corrosion resistant, providing long-lasting protection to equipment.

    Our Teflon Lubricating Grease High Load and High Speed ​​- All Surfaces and Central Lubrication is suitable for use in various industries, including the automotive, agricultural, aerospace and maritime sectors. The lubricating grease offers excellent resistance to high temperatures and pressures, making it suitable for the most demanding applications.

    At Vossen Chemicals we guarantee the highest quality. All our products are extensively tested and meet the highest quality standards.

    Download SDS Teflon Lubricant High Load and High Speed ​​– All Surfaces and Central Lubrication

    Product form

    Teflon Lubricating Grease High Load and High Speed ​​- All Surfaces and Central Lubrication (product 636) is a universally applicable... Read more

    Shipped within 2 business days

    €339,15

      • Free shipping from €200 Excl. VAT
      • Secure payment
      • Work safer and environmentally friendlier
      Instructions

      • New bearings: fill the bearings until the grease is just visible. Depending on use, after about a week, due to air formation in the bearing housing, lubricate until the pressure has built up.
      • Old bearings: If possible, lubricate until filled with new grease, then follow procedure for new bearings.
      • General: reduces the lubrication frequency by a factor of 3 to 5 compared to normal lubrication.

      Specifications
      Specifications
      Colour Beige
      Density at 20°C (IPPM-CS/03)
      0.9 g/ml
      NLGI ( ASTM D217 )
      2
      thickener
      lithium complex
      Type b base oil
      Mineral oil
      Dropping point (IP 396)
      >270 °C
      Base oil viscosity at 40ºC (ISO 12058 )
      210 cst
      Base oil viscosity at 100ºC (ISO 12058)
      18 cst
      4 ball welding test (DIN 51350:4)
      3000 N
      Temperature range
      -30 until 1 4 0 °C
      Peak temperature
      220°C
      Penetration 60 strokes (ISO 2137)
      max. 295mm /10
      Penetration 100,000 strokes (ISO 2137)
      +30mm/10
      SKF Emcor WWO Distilled W ater (ISO 11007mod)
      0-0
      SKF Emcor WWO salt water (ISO 11007mod)
      2-3
      Copper corrosion (ASTM D4048)
      1a 24h/100°C
      Water resistance (DIN 51807/1)
      1-90
      Oil separation 168 hours at 40°C (IP 121)
      2%
      SKF R2F test A
      Satisfies
      SKF R2F test B at 1 4 0 °C
      Satisfies
      4 ball wear 1 hour at 400 N (DIN 51350:5)
      0.8mm
      Comments

      • Suitable for temperatures up to 150°C.
      • The product must be tested for miscibility with certain Li and Ca fats.

      More information about our packaging

      400 grams = cartridges
      10 kg = 1 bucket of 10 kg
      25 kg = 1 drum of 25 kg
      50 kg = 1 drum of 50 kg
      100 kg = 2 drums of 50 kg

      For more packaging options, please email our customer service customer.service@vossenlaboratories.com

      We ship to the Netherlands, Belgium, Germany and Austria as standard. We also ship worldwide on request. If you are outside these areas, request a quote without obligation via the button below. We do not ship 10 liter packages to Austria.

      Description

      Teflon Lubricating Grease High Load and High Speed ​​- All Surfaces and Central Lubrication (product 636) is a universally applicable NLGI 2 grease with PTFE (Polytetrafluoroethylene). It is suitable for use in heavily and varyingly loaded ball, rolling, roller and sliding bearings, but also for axle journals of water pumps, winches, chassis, leaf springs, ball joints, etc.

      • Good adhesion
      • Long service life and corrosion resistant
      • Extra protection against shock and vibration loads

      Reduce the lubrication frequency by a factor of 3 to 5.

      This lubricating grease is composed of NLGI 2 grease with PTFE (Polytetrafluoroethylene), which gives it good adhesion and a long service life. It is suitable for ball, rolling, roller and plain bearings as well as for journals of water pumps, winches, chassis, leaf springs, ball joints and other applications. In addition, it provides additional protection against shock and vibration loads and is corrosion resistant, providing long-lasting protection to equipment.

      Our Teflon Lubricating Grease High Load and High Speed ​​- All Surfaces and Central Lubrication is suitable for use in various industries, including the automotive, agricultural, aerospace and maritime sectors. The lubricating grease offers excellent resistance to high temperatures and pressures, making it suitable for the most demanding applications.

      At Vossen Chemicals we guarantee the highest quality. All our products are extensively tested and meet the highest quality standards.

      Download SDS Teflon Lubricant High Load and High Speed ​​– All Surfaces and Central Lubrication

      Login

      Forgot your password?

      Don't have an account yet?
      Create account