All Products

Food FDC - Ceramic Lubricating Oil High Vibration and Shock Load up to 250°C - Food Safe Surfaces (product 493) is a high-quality synthetic H1 registered lubricating oil with FDC (Friction Delay Complex), for "filling" irregularities in and tolerances between the metal surfaces and for "emergency running".  Food FDC - Ceramic Lubricating Oil High Vibration and Shock Load up to 250°C - Food Safe Surfaces is mainly used for lubricating and/or preserving conveyor belts, chains and parts in the food processing and pharmaceutical industries. It is ideally suited for lubricating chains, hinges and sliding surfaces that are subject to high vibration, shock, point pressure and shear forces under extreme temperatures. In addition, it repels rust, dirt and water. Extremely good emergency lubrication Preservative for metal Perfectly water and steam resistant Reduce the lubrication frequency by a factor of 3 to 5. Download SDS Food FDC - Ceramic Lubricating Oil High Vibration and Shock Load up to 250°C - Food Safe Surfaces

Read more less

Fat, Oil and Grease Remover HF – Machines and Materials (hight flamepoint) (product 480) is a powerful industrial degreaser based on aliphatic hydrocarbons. Use Oil and Grease Remover HF – Machines and Materials for quick and easy removal of grease, oil and grease from machines, materials, engines and parts. Effective and safe on material Pleasant smell Leaves a preservative layer This product cleans up to 60 m2 surface.

Read more less

Degrease Buffer HF – Degrease Tank (high flash point) (product 457) is a powerful industrial degreaser based on aliphatic hydrocarbons. It is used to remove encrusted grease, oil and grease on parts using a cleaning table (VOSSEN-Junior 60 or VOSSEN-Economy 200).  The operating principle is based on the phase separation of the degreaser and buffer liquid in the vessel. Each time fresh Degrease Buffer HF – Degrease Tank HF is sucked in from about halfway through the vessel and used. The used, contaminated Degreasing Buffer HF – Degreasing Tank is led back from the flushing tank all the way to the bottom of the vessel. There the (polar) contamination remains buffered, while the degreaser can be sucked in again. Eventually, the entire liquid (Degrease buffer HF – Degrease container) in the vessel will be saturated and must then be collected and processed by a recognized waste company.  Effective and safe for metal  Pleasant smell  Leaves a preservative film 

Read more less

Degrease Buffer – Degrease Tank (product 446) is a powerful industrial degreaser based on aliphatic hydrocarbons. It is used for the removal of caked grease, oil and grease on parts, using a cleaning table (VOSSEN-Junior 60 or VOSSEN-Economy 200). The operating principle is based on the phase separation of the degreaser and buffer liquid in the vessel. Each time, fresh Degrease Buffer – Degrease Tank is sucked in from about halfway through the vessel and used. The used, contaminated Degrease Buffer – Degrease Tank is led back from the sink to the very bottom of the vessel. There the (polar) contamination remains buffered, while the degreaser can be sucked in again. Eventually, the entire liquid (Degrease Buffer – Degrease Tank) in the vessel will be saturated and must then be collected and processed by a recognized waste company. Effective and safe for metal Pleasant scent Leaves a preservative film

Read more less

ECO Oil and Grease Remover (product 435) is a powerful, fast and safe cleaning agent with an extremely powerful degreasing effect. Due to its innovative formula, it works quickly and is also as little harmful as possible to humans, animals and the environment. Use ECO Oil and Grease Remover to remove grease, oil and grease from all surfaces, such as walls, brick, concrete, facades and façades.  Cleans and degreases quickly and effectively Does not evaporate quickly Safe and environmentally responsible This product cleans up to 60 m2 surface.

Read more less

Fat, Oil, and Grease Remover – Machines and Materials (product 423) is a powerful, fast and safe degreaser based on chlorine-free solvents. This means that the product works very quickly and is also as little harmful as possible to humans, animals and nature. Use Fat, Oil, and Grease Remover – Machines and Materials to remove grease, oil and grease from all machines and equipment. Pleasant smell Quickly and easily removes oil and grease Safe for humans, animals and nature This all-purpose cleaner degreaser for machines and materials is a powerful, safe industrial degreaser. In addition, the product is used for degreasing heavy (encrusted) contamination. Such as oil, or grease on e.g. engines, equipment and parts. Due to the high concentration of the product, it has a powerful effect and is extremely suitable for industrial applications. The degreaser can be used as an all-purpose cleaner, for heavily soiled machines and for industrial pollution. The product quickly dissolves (heavy) pollution and is a powerful degreaser. The product is also suitable for multiple surfaces and is safe for humans, animals and nature. To achieve an optimal result, it is possible to use this product in combination with Sorb to use. Download SDS Fat, Oil, and Grease Remover – Machines and Materials

Read more less

Synthetic and Epoxy Resin Remover (product 325) is a specially developed cleaning agent for easy, quick and safe removal of synthetic and epoxy resins from machines, floors and materials. Use Synthetic and Epoxy Resin Remover for removing synthetic and epoxy resin and resin stains on floors, machines and conveyor belts, without affecting the surface. Very powerful Extremely fast operation No pungent smell Do you suffer from stubborn resin stains on machines, floors or other materials? Don't worry, the Synthetic and Epoxy Resin Remover from Vossen Greener Chemicals offers the solution! This specially developed cleaning agent is very powerful and safe in removing synthetic and epoxy resins from various surfaces. With the Synthetic and Epoxy Resin Remover has an extremely fast effect. You will be rid of the stubborn resin stains on floors, machines and conveyor belts in no time at all. In addition, this remedy does not have a pungent odor. In addition, the Synthetic and Epoxy Resin Remover is extremely powerful and safe to use. It therefore does not affect the surface. This also allows you to get started with the removal of synthetic and epoxy resins without any worries. The product is suitable for various surfaces and ensures optimal removal of resin stains from the surface. Therefore choose the Synthetic and Epoxy Resin Remover from Vossen Greener Chemicals and make cleaning a lot easier and safer.

Read more less

Resin Remover – Machines and Materials (product 311) is a specially developed cleaning agent for the easy, quick and safe removal of resins, residues and plant sap from machines and materials. Use Resin Remover - Machines and Materials to remove resin, glue and sticker formation on machines and materials in woodworking, among other things, without affecting the surface. Powerful and fast Does not evaporate quickly Safe for surfaces Resins can build up on machines and materials in the woodworking industry. This affects the performance of the tool and reduces the efficiency of the production process. Resin Remover - Machines and Materials offers a powerful and fast solution to tackle these problems. This makes machines and tools like new again. Our cleaner is not only suitable for removing resin. But also for removing glue and sticker formation on machines and materials in the woodworking industry. It is important to note that our formula is safe for surfaces. In addition, it does not evaporate quickly, making it an ideal solution for industrial applications. Download SDS Resin Remover – Machines and Materials

Read more less

Graffiti Remover – Lexan and Plastic Surfaces (product 310) is a specially developed cleaning agent for the easy, quick and safe removal of graffiti, ink and marker from Lexan or plastic parts and surfaces. Use Graffiti Remover - Lexan and Plastic Surfaces to remove marker, ink, graffiti on covers, floors and surfaces, among other things, without affecting the surface. Powerful and fast Does not evaporate quickly Safe for surfaces Our Graffiti Remover has been specially developed to remove graffiti, ink and marker. Use this product on lexan or plastic parts and surfaces. In addition, the application of this product is easy, fast and safe. This powerful cleaning agent is the ideal choice for removing marker, ink, graffiti and other unwanted marks on covers, floors and surfaces, without damaging the surface. Our Graffiti Remover is powerful and fast and ensures efficient cleaning. Moreover, you don't have to put in much effort. Moreover, it does not evaporate quickly. This also means that you have sufficient time to let the product take effect. Consequently, you can easily achieve the desired result. In addition, our Graffiti Remover is safe for surfaces. It is the perfect choice for industrial companies that want to remove graffiti and other unwanted marks quickly, easily and safely. Download SDS Graffiti Remover – Lexan and Plastic Surfaces

Read more less

Injection Molding Machine Cleaner – Combined Contamination (product 259) is a strong acidic cleaning agent for the quick, safe and easy removal of combined contamination in pipes and injection molding machines in the plastics industry. This includes: lime, scale, ferric chloride, rust and black deposits, but also fatty deposits, bacterial contamination and sludge. Use Injection Molding Machine Cleaner – Combined Contamination for quick and easy cleaning of pipes and injection molding machines in the plastics industry . Does not attack steel, copper and aluminum Harmless to seals and rubbers Completely biodegradable Download SDS Injection Molding Machine Cleaner – Combined Contamination

Read more less

Heat Exchanger Cleaner – Combined Pollution (product 258) is a strong acid cleaning agent for the quick, safe and easy removal of combined pollution in pipes and heat exchangers. This includes: lime, scale, ferric chloride, rust and black deposits, but also fatty deposits, bacterial contamination and sludge. Use Heat Exchanger Cleaner – Combined Pollution for quick and easy cleaning of all pipes, heat exchangers and condenser coils. Does not attack steel, copper and aluminum Harmless to seals and rubbers Completely biodegradable Download SDS Heat Exchanger Cleaner – Combined Pollution

Read more less

Capacitor Coil Cleaner – Combined Pollution (product 257) is a strong acid cleaner for the quick, safe and easy removal of combined fouling in pipes and condenser coils. This includes: lime, scale, ferric chloride, rust and black deposits, but also fatty deposits, bacterial pollution and sludge. Use Capacitor Coil Cleaner – Combined Pollution for quick and easy cleaning of all your pipes, heat exchangers and condenser coils. Does not attack steel, copper and aluminum Harmless to seals and rubbers Completely biodegradable Download SDS Capacitor Coil Cleaner – Combined Pollution

Read more less